Question: Do Sleepers Need Foundations?

Will sleepers rot in the ground?

How to preserve wooden railway sleepers.

Like all wood, sleepers will eventually rot and fade when exposed to the weather.

To prevent them falling to bits before their time, you need to use a good wood preserver..

Are railway sleepers expensive?

New railway sleepers tend to be made from softwoods such as pine or spruce, but you can also find new oak sleepers at a higher price. … New oak railway sleepers are usually more expensive than the used ones but are far easier to treat and paint than their used counterparts.

Can you lay sleepers on grass?

2) Lay the railway sleepers on the ground. (Like creating a big picture frame). The railway sleepers should ideally be laid on a surface that is level and firm. Many people simply lay them down directly on the earth, grass, deck or concrete.

Can you lay railway sleepers on soil?

For one, you can simply place your sleepers directly onto soil, allowing the heavy sleepers time to bed in. … The use of gravel or sand to secure sleepers is a popular alternative to concrete.

How long do railway sleepers last?

As a rule, hardwood oak sleepers tend to last the longest naturally with an expected lifespan of around 100 years. An untreated softwood will last for between three and five years if it sits on the ground, whilst treated softwoods can last between 20 and 30 years if they are maintained correctly.

How do you join sleepers together?

Cut your sleepers to your required length, which could be random for a rustic look. Then mix up some lean mortar, such as 6:1, to be used as a concrete base and haunching. Place at least a 50mm bed of concrete in the bottom of the trench and start inserting the sleepers, haunching them up as you go.

How high can a sleeper retaining wall be?

The usual ‘rule of thumb’ is that one-third of the overall height should be buried: So, if a 2400mm long sleeper was to be used, 800mm would need to be inserted into the ground and concreted in place, with 160mm above ground.

How do you cut railway sleepers?

Cut your sleepers with a circular saw or a chainsaw by slowly making clean, straight cuts. Use a square angle ruler to make sure your sleepers will fit perfectly. Alternatively you can ask for sleepers to be precut which The Luxury Wood Company is happy to do.

What can I use instead of a railway sleeper?

WoodBlocXA Railway Sleeper Alternative So anything a railway sleeper can do, WoodBlocX can do better! The hard-wearing nature of WoodblocX means they are perfect for retaining walls, raised flower and vegetable beds, garden benches to relax on, fish ponds, garden and lawn edging, composting area or even children’s sandpit.

Can you paint railway sleepers?

A range of high quality paints for wooden railway sleepers. These railway sleeper paints provide a strong, durable finish with protection against the elements and come in a selection of bold colours and sheens. Whether new or old railway sleepers, we have a wood paint to suit your needs.

How do you fix railway sleepers to the ground?

Sink the bottom sleepers into the ground to half their depth, drill holes in the sleepers at 1m centres, 25mm wide by 75mm deep. Tap 150mm long dowels into the holes, fix the next layer of sleepers by locking dowels into matching holes. Drill and fix the next layer of railway sleepers.

How much do garden sleepers cost?

$250 to $350 per square metre for treated timber (pine) $300 to $450 per square metre for treated timber sleepers (hardwood) Used railway sleepers are sometimes hard to come by and their price depends upon availability. On average, they cost about $75 each.

What should I Bed railway sleepers on?

Sleepers are best constructed on a firm and level surface such as soil, grass, decking or concrete, however, you should still use a spirit level to ensure the surface is as level as possible. Depending on your project, you may wish to use sand, cement or offcuts to level things out.