Question: What Are Common Socket Sizes?

What are the standard socket sizes?

3/8 Inch Square Drive: Six Point Standard Sockets (5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16) Six Point Metric Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) Six Point Metric Deep Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19).

What is the most common socket size?

10mm sockets and 36mm sockets are typically the most commonly used sizes. Torx bit sockets.

What is equivalent to 10mm socket?

Standard / Metric Wrench Conversion ChartBolt DiameterStandardMetric1/8″5/16″8mm3/16″3/8″10mm1/4″7/16″11mm5/16″1/2″13mm39 more rows•Aug 26, 2019

What are the best socket sets to buy?

EPAuto 1/4″ & 3/8″ Drive Socket Set The next product in our list of the best socket wrench set in 2020 is EPAuto 92-824. If you are looking for a durable and full-item wrench set in less than $50, this set is the best socket set for you. EPAuto has 69 pieces of 1/4inch and 3/8 inch in size.

What are the most common wrench sizes?

Most common are the 1/4-inch, 3/8-inch and ½-inch ratchet drivers, but ¾-inch and 1-inch sets are available for heavy-duty work.

What’s smaller than a 7/16 socket?

Standard / Metric Wrench Conversion ChartBolt DiameterStandardMetric3/8″9/16″14mm7/16″5/8″16mm1/2″3/4″19mm9/16″13/16″21mm39 more rows•Aug 26, 2019

What are the standard socket sizes smallest to largest?

Metric Socket Sizes Chart1/4″ Drive3/8″ Drive1/2″ Drive5mm7mm10mm5.5mm8mm11mm6mm9mm12mm7mm10mm13mm18 more rows

What size socket wrench do I need?

The rule of thumb is that the drive size of the ratchet and sockets should approximate the diameter of the bolt or nut you want to turn. Thus, when you’re working with fasteners that are more or less 1/4″ or 6mm, use the 1/4″ drive. If you’re working with hardware that’s roughly 3/8″ or 10mm, use the 3/8″ set.

What are the four socket drive sizes?

These drive fittings come in four common sizes: ​1⁄4 inch, ​3⁄8 inch, ​1⁄2 inch, and ​3⁄4 inch (referred to as “drives”, as in “​3⁄8 drive”).

What can I use if I don’t have a socket wrench?

What to Use if You Don’t Have a WrenchDuck tape. Duct tape is useful in almost any situation but you may be surprised to learn that you can use it to loosen bolts. … Two coins. Who would think that money can be used as a makeshift tool? … Zip-tie. … Another nut and bolt.

How do socket sizes work?

In the current market, socket sizes are divided into two systems: SAE (imperial, measured in inches) and metric (measured in millimeters). Both 6-point and 12-point sockets are measured using these two systems. The popular range is 5.5~24mm.

What is a 12mm socket in standard?

11mm. 7/16 Inch. 0.43307 Inches. 12mm. Just short of 1/2 Inch.

What’s the next size smaller than a 9/16 wrench?

Wrench Size Chart for BoltsBolt DiameterWrench Size (Standard)Wrench Size (Metric)7/16″5/8″16mm1/2″3/4″19mm9/16″13/16″21mm5/8″15/16″24mm20 more rows•May 29, 2020

What is the next size down from 7 16?

The next size after 00g is 7/16″. The sizes go up by 1 sixteenth of an inch from there, but they’re reduced fractions, so instead of 8/16″, we just say 1/2″. (And you probably thought in school you’d never have any use for learning fractions!)

Is a 3/8 socket the same as a 10mm?

It’s the same size. 3/8 is in inch and and its 10mm.

How do I figure out my wrench size?

Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.

What size bolt does a 1/2 inch wrench fit?

US Bolt Head/Wrench SizeBolt DiameterHead and Wrench SizeHex Bolt – Lag Bolt – Square BoltHeavy Hex Bolt5/16″1/2″-3/8″9/16″-7/16″5/8″-13 more rows

What is a 30 mm socket in standard size?

Wrench Size And Conversion TableInchesMillimetersSpanner1.18130mm30mm1.20011/16 Wworth; 3/4 BSF1.2501 1/4 AF1.26032mm32mm65 more rows